A SERVICE OF

logo

26
…4 CONFIGURATION MODE
4.3.4 Digital Input and Serial Communications – Figs. 4.7 and 4.8
'PRST' Settings
The first character (P, R, S or T) identifies the
parameter to be changed and the current setting is
indicated by a flashing letter. Parameter options are
shown in Fig. 4.8.
P = Digital input function
r = Analog input filter
S = Serial communications configuration
t = Serial communications parity
Note. For custom settings contact the local
distributor.
Continued on page 28.
Fig. 4.7 Digital Function Configuration
Information.
Digital input options 1, 2, 3 and 5 are edge-triggered to enable the front
panel keys to change the function when the digital input is operational.
Max
Min
Stop
Go
Reset
Lock
Unlock
Acknowledge
1 Totalizer Reset
2 Totalizer Stop/Go
3 Average Max/Min Reset
4 Front Panel Lock out
5 Alarm Acknowledge
r 0000
P 0000
S 0000
t 0000
LEVEL4