Table 28. Removal steps of LCD bezel assembly (continued)
When installing: Make sure that all the latches are attached rmly. Then secure the bezel with the screws.
2030 Integrated camera
For access, remove these FRUs in order:
• “1010 Battery pack” on page 50
• “1020 Bottom slot cover” on page 51
• “1040 Hard disk drive or solid state drive assembly” on page 53
• “1070 Keyboard” on page 57
• “1090 Top case assembly” on page 60
• “1130 System board assembly, fan assembly, and backup battery” on page 65
• “2010 LCD unit” on page 71
• “2020 LCD bezel assembly” on page 73
Table 29. Removal steps of integrated camera
When installing: Make sure that the connector is attached rmly.
74 Hardware Maintenance Manual
