A SERVICE OF

logo

18 The RX2 Battery Charger
RX2 User’s Guide E-EQ-RX2OGWW-B
The RX2 Battery Charger
The RX2 battery charger accepts AC power input.
Figure 18 RX2 Battery Charger
The charger can be used to internal RX2 battery pack in less than six hours. The battery changer
can operate in environments from 32°F to 104°F (0°C to 40°C).
The charger has a red LED that indicates the status of the charger:
Rapid flashing – The charger is in deep discharge mode.
Solid – The charger is in Rapid Charge mode.
Slowly flashing – The battery is charged and ready for use. The charger provides a
trickle charge to keep the battery at full charge.
Before using the Charger, please follow the instructions in “Prepare Charger Connection”, earlier
in this section, to mount the cables necessary for the Charger connection.