1E
Recording
Basic SetupConnections Playback EditingIntroduction Function Setup Others
Español
TIMER RECORDING
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The rst 2 minutes (at the longest) will be cut o.
PROG. A
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap
• When timer programs overlap, the
irst 2 minutes (at the longest) o
the later recording will be cut o
.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priorit
will be cancelled or start from the middle.
• Check the overlapped timer programmings and change the priorit
if necessar
.
• I
there is a power
ailure or this unit has been unplugged
or more than 1 hour, the clock setting and all timer
pro
rammin
wi
e
ost
• When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to
page 48
.
• When a timer recording is completed, the unit will ask you whether to turn the unit to the standby mode if there is no
timer recording which starts within 5 minutes, except under conditions listed below.
During playback of HDD or DVD
While displaying menus or information on the screen.
• The unit will be turned to the standb
mode automaticall
if
ou select “Yes” or if
ou do not repl
in 1 minute.
• When the pro
rammed startin
and endin
time are earlier than the current time, the settin
will not be accepted
and be cleared for redoin
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
ress [OK] at step 8 on page 48
• You cannot change the audio language
or the timer recording o
digital TV broadcasting.
• Timer recordin
whose recordin
time exceeds 12 hours cannot be made.
• It is prohibited to turn the unit to the standby mode from 4 minutes before the programmed starting time
• It is prohibited to change channel from 15 seconds before the programmed starting time.
•
REC
does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the
startin
time durin
re
ular or one-touch timer recordin
, the recordin
in pro
ress will be stopped
• Playback o
DVD/CD is prohibited
rom 2 minutes be
ore the programmed starting time when the recording media is
VD. If it comes to 2 minutes before the programmed starting time during DVD pla
back, the pla
back will be
stopped
The Priority of Overlapped Setting
Note for DVD recordin
When the recording time o
2 programs are overlapped, or
the end time o
a program and the start time o
another
program is the same, the
irst 2 minutes (at the longest) o
the subsequent program will be cut o
If the cut-off portion comes up to 3 minute or more, this
program will be displa
ed with error number E40 in the
timer pro
rammin
list.
PROG. A
PROG. B
actual
recording
The rst 2 minutes (at the longest) will be cut o.
PROG. BPROG. A
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut o.
Hints for Timer Recording
