RADSL Card Configuration
3-20
8000-A2-GB20-50
April 2000
DSL Configuration IP Router Screens
Use the system information submenu of the IP Router screens to configure static
routes to protocols and filters.
" Procedure
To configure static routes, martian networks, IP router filters, ARP and Host
tables:
1. Follow this menu sequence:
Configuration →IP Router (A-E)
2. The IP Router menu appears. Enter the desired value on each selected
screen and field as shown in Table 3-5 and press Enter.
NOTE:
Each time you create a static route for an end-user system behind an RTU,
you should also create a corresponding source-based input filter rule. See IP
Address Allocation, IP Routing, and IP Filtering, in the Hotwire 8540 and
8546 RADSL Cards Network Configuration Guide.
