21
STEP 10: INSTALL THE REAR SHROUD
6
1, 5
4
2
2
ITEM PART NO.DESCRIPTION QTY.
1 C 766A LOCKNUT, 3/8”-16 2
2 C 675D SCREW, 1/4”-20 X 1/2” BHCS 8
3 C 444 SCREW, 3/8”-16 X 3/4” HHCS 2
4 FS-SHD-250X REAR SHROUD 1
5 C 754C FLAT WASHER, 3/8” 4
6 FS-CAP-000X TOP CAP, UPRIGHT 1
7 FS-BKT-001 TOP CAP, BRACKET 2
1. Set the lower screws of the shroud into the
lower brackets on the upright frame.
2. Then align the holes for the brackets at
the top of the shroud.
3. Assemble all the shroud hardware and
tighten.
4. Assemble the top cap brackets and
hardware. Then assemble to the machine.
3, 5
7
