11
Using the plug-on transmitter
To activate the RF signal:
To switch the plug-on transmitter off:
̈ If necessary, deactivate the lock mode (see page 11).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 21). If the lock mode is activated, you have to
temporarily deactivate it In order to be able to operate the plug-on
transmitter:
̈ Press the SET button.
The transmission frequency is displayed but the plug-on
transmitter does not transmit an RF signal. The transmission
icon ብ is not displayed.
Use this function to save battery power or to prepare a plug-on
transmitter for use during live operation without causing
interference to existing transmission links.
̈ Press the ON/OFF button.
“RF Mute Off?” appears on the display panel.
̈ Press the SET button.
The transmission icon ብ is displayed again.
̈ Keep the ON/OFF button º pressed until “OFF” appears on
the display panel.
The red ON LED ¶ goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button º will
cancel your entry (ESC function) and return you to the current
standard display.
̈ Press the SET button or the ON/OFF button.
“Locked” appears on the display panel.
̈ Press the UP button.
“Unlock?” appears on the display panel.
SET
MHz
543.850
**2000**
MUTE
P
AF
ብ
ON/OFF
SET
ON/OFF
ON/OFF SET
