13
Using the plug-on transmitter
̈ Exit the operating menu.
̈ Slide the MUTE switch ¾ to the left, to the position MUTE.
The plug-on transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
State Transmitter’s display panel
Audio signal is muted “MUTE” ቨ is displayed
Audio signal is activated
(muting is canceled)
“MUTE” ቨ is not displayed
RF signal is deactivated “MUTE” ቨ is displayed,
transmission icon ብ is not displayed
RF signal is activated “MUTE” ቨ is not displayed,
transmission icon ብ is displayed
You can also deactivate the RF signal on switch-on. For more
information, refer to the chapter “Switching the plug-on
transmitter on/off” on page 10.
Using the ON/OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the ON/OFF button
and proceed as described on page 10.
MHz
543.850
**2000**
MUTE
P
AF
ብ
ቨ
