23
Adjusting settings via the operating menu
Selecting a frequency bank and a channel and assigning this
channel a transmission frequency
̈ Set the desired frequency bank and the desired channel.
̈ Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the MUTE switch ¾, refer to page 12.
̈ Press the UP/DOWN button until the “Tune” menu item
appears.
̈ Keep the SET button pressed until the frequency bank
selection appears.
̈ Press the SET button.
The frequency selection appears.
Mode Function
“AF On/Off” When the switch is in the MUTE position,
no audio signal is transmitted.
“RF On/Off” When the switch is in the MUTE position,
the RF signal is deactivated
.
“Disabled” The muting function is deactivated.
SET
Tune
B.Ch: U. 1
543.850MHz 543.850MHz
B.Ch: U. 1
Tune
Advanced
Menu
Tune
“Stored”
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)
SET
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/OffAF On/Off
“Stored”
Call up
“Mute Mode”
Select the desired
setting
Store the setting
