Xerox 61xx Manual

A SERVICE OF

next previous

Routine maintenance

5-26 DocuTech 61xx Operator Guide

• If there is no wire on the spool, use the wire cutters to pull

the remaining wire carefully out of the tubing, as shown in

figure 5-23.

NOTE: The wire cutter tool needed to perform this

procedure is located next to stitcher spool B.

Figure 5-23. Removing the wire from the tubing

• If there is wire on the spool, hold it on the spool and

carefully rewind the remaining wire out of the tubing and

onto the stitcher spool, as shown in figure 5-24.