67
BASIC CONCEPTS
Chapter 1
1
Save to floppy disk
• Let’s save the patterns and song that you created to a floppy
disk.
1. Prepare a new disk.
• The QY700 can use 3.5 inch floppy disks of either 2HD or
2DD types.
• For details on types of disk, refer to “Chapter 7. DISK
MODE” (→ p.302).
2. Insert the floppy disk into the floppy disk drive.
• For details on inserting floppy disks, refer to “Chapter 7.
DISK MODE” (→ p.302).
3. Format the floppy disk.
• Press d to enter Disk mode.
• For the formatting procedure, refer to “Chapter 7. DISK
MODE” (→ p.306).
4. Save the data.
(1) Press 1 (Save), and then press d [D1] (All Data)
to access the Save All Data page.
(2) Use the microkeyboard to input the filename.
• Pressing 6 will enter “ALL-DATA” as the filename.
(3) Press e.
▼ The display will indicate “Executing...” and the data will be
saved.
• With this procedure, all data of the song that you created
has been saved to floppy disk.
Filename
• The song data will remain in memory even if the power is
turned off, but even if it is erased when you create a differ-
ent song etc., you will always be able to recall it by loading
the file “ALL-DATA” from the floppy disk.
