Filter
Top Products
AdderLink Installation and Use Page 26
The best compensation setting may be set using the following technique.
• Press {{until you observe white trailing edges on the right hand side of
black text or graphics.
• Press and release yyseveral times until the white trailing edges just disappear.
STEP 4
Press
ff
to exit from compensation mode.
The AdderLink saves the selected video compensation setting when you exit from
compensation mode. This setting is retained within the AdderLink even when the
power is off and so unless you change the twisted pair cable you will not need to re-
adjust the compensation setting again.
2.9 Configuring user-selectable options
The AdderLink supports a number of user-configurable options that change the
detailed operation of the AdderLink to match the required application. These may be
selected whilst the AdderLink is in video compensation / configuration mode. Whilst
within configuration mode the version number of the AdderLink’s firmware may also
be queried.
To enter configuration mode press the HOTKEYS together with ff on the
keyboard connected to the XR receiver unit. The HOTKEYS are those that were set
using the option switches (CTRL + ALT by default).
For example, assuming the default hotkeys, press these keys together :
b a fb a f