Filter
Top Products
Introduction
7
from the computer, all in 24-bit, 44.1/48/88.2/96 kHz
digital audio.
y ASIO and WDM computer drivers – lets you use the
MultiMix USB2.0 with the vast majority of digital audio
workstation programs.
y Clean and powerful preamps – up to 50dB of preamp
gain for capturing quiet sources. Globally switched
phantom power.
y Stereo inputs – Four stereo pairs. Great for line-level
instruments.
y Internal digital effects processor with 100 preset
effects and an easy-to-read display – includes a variety
of reverbs, delays, choruses, flanges, a pitch transposer and
multiple combinations of these.
y 3-band EQ per channel – a potent tool for sonically
shaping each channel to get that perfect mix.
y 2 aux sends per channel – one can be used to access an
external effects device; the other can be used either to
access the MultiMix’s internal effects or to access a second
external device. The first aux send can be switched
between either pre- or post-fader operation.
y Control room output level – provides control over the
separate control room output.
y 2-track send and return – lets you mix your audio to tape
or other media and to add a tape deck or CD player to the
mix.
Additional Features of the MultiMix 16
USB2.0
y PFL/Solo in place functionality per channel – isolates a
channel with a single push of a button.
y Mute/Alt 3/4 assign per channel – lets you mute a
channel and, at the same time, route its signal to the mixer’s
ALT 3/4 output—a separate stereo bus.
y Independent Main Mix and Alt 3/4 levels – permits you
to separately command the levels of the MultiMix’s two
stereo buses