Filter
Top Products
Chapter 6: Applications
72 ADAT XT Reference Manual
ª Press [EDIT VALUE], then press [LOCATE 5].
Edit Mode will now be selected. The TIME counter will display a time for Locate 5
(like
0:00:47.30
). Write this number down or memorize it.
D Press [TAPE OFFSET] (while still in Edit Mode) and enter the value that was
displayed for Locate 5 (0:00:47.30).
To do this, press and hold the
[EDIT VALUE]
button and press
[LOCATE 4]
,
[LOCATE 7]
,
[LOCATE 3]
then
[LOCATE 0]
; then release
[EDIT VALUE]
.
« Press [EDIT VALUE] to exit Edit Mode.
» Press [TAPE OFFSET] to turn the Tape Offset function on.