Filter
Top Products
EFFECT Knob Settings
10
29
Rotary Speaker
Emulates the sound of the classic rotary, creating a Doppler effect
similar to that achieved by an organ’s rotating speaker. Higher
values result in greater intensity and pan depth.
Pedal Rotary Speaker
A rotary speaker effect whose intensity and pan depth are
controlled by the control pedal.
Chorus
Adds fullness to your sound by emulating a chorus of multiple
instruments. Higher values indicate greater modulation depth.
Pedal Chorus
A Chorus effect whose modulation depth is controlled by the
control pedal.
Pitch Transpose
Transposes the pitch of the signal either up or down. P0 – P4
transpose the pitch down a minor third, a major third, a perfect
fourth and a perfect fifth respectively. P5 – P9 transpose the pitch
up in the same manner.
Variable Pitch Transpose Up
Variably transposes the pitch upward from 0 to 2 octaves
according to the setting of the direct-control parameter for FX1.
Variable Pitch Transpose Down
Variably transposes the pitch downward from 0 to 2 octaves
according to the setting of the direct-control parameter for FX1.
Turns off FX1.
PARAM (Direct-Control Parameter for FX1)
This parameter modifies the operation of the effect selected for the FX1
module. Changing between effect types with dissimilar value ranges will scale
this value accordingly. For example, if you set Phaser to PARAM=63 and then
switch to the Auto Wah effect, its PARAM value will be 12. Changing back to
Phaser will result in a PARAM value of 63.