Filter
Top Products
EFFECT Knob Settings
10
31
Auto Pan
Pans the signal back and forth from left to right at a constant rate
determined by the PARAM setting. Higher values result in
increased pan depth.
Pedal Auto Pan
An Auto Pan effect whose depth is controlled by the control pedal.
Octaver
Adds a note an octave lower than the note you are playing. Higher
values result in greater intensity. Please see the warning on page 18
regarding the use of this effect.
Pedal Octaver
An Octaver effect whose intensity is controlled by the control
pedal.
Turns off FX2.
PARAM (Direct-Control Parameter for FX2)
These parameters work exactly the same way as the direct-control parameter for
FX1, with the following additions.
For Ring Mod and Auto Pan, indicates the rate of the effect.
Indicates that the effect assigned to the FX2 module does not have
a direct-control parameter (for example, Octaver) or that FX2 is
off.
FX3 (Multi-Effect Module 3, Delay-Based Effects)
This module gives you a choice of delay-based effects. A delay is an echo of the
original signal that can occur at varying frequency and time. This module
includes the following effects from the FX1 module: Chorus, Flanger, Pedal
Flanger, Rotary Speaker, Pedal Rotary Speaker, Pitch Transpose, Variable Pitch
Transpose Up and Variable Pitch Transpose Down. FX3 also provides the
following additional effects:
Doubling
Doubles the signal with a slight delay, creating the effect of two
instruments playing at once. Higher values indicate higher intensity.