Filter
Top Products
10
EFFECT Knob Settings
30
Indicates the value of FX1’s direct-control parameter, according to
the following:
For Phaser, Tremolo, Step Filter, Auto Pan, Flanger and Chorus,
indicates the rate of the effect.
For Slow Attack, indicates the rate of the attack.
For Rotary Speaker, indicates the rate of the speaker rotation.
For Pedal Pitch Transpose Up and Down, indicates the amount of
pitch change in 1/4 semitones (from 1/4 semitone to more than 2
octaves). Wet/dry mix is fixed at 100% wet.
For Cry, Auto Wah and Auto Phaser, indicates the sensitivity of
the filter modulation
For Pitch Transpose with a fixed interval, indicates the wet/dry
mix from 0 (100% dry) to 10 (50% wet, 50% dry) to 20 (100%
wet).
Indicates that the control pedal controls the parameter.
Indicates that the effect assigned to the FX1 module does not have
a direct-control parameter (for example, Sub-Bass Synthesis) or
that FX1 is off.
FX2 (Multi-Effect Module 2, Stereo Effects)
This module gives you a choice of stereo effects. These effects include all those
found in FX1 except for Flanger, Rotary Speaker, and Pitch Transpose. FX2 also
gives you the following additional effects.
Ring Modulation
An effect that modulates the amplitude of the signal, giving it a
metallic sound. Higher values result in greater modulation depth.
Pedal Ring Modulation
Ring modulation whose depth is controlled by the control pedal.