Filter
Top Products
7. FRAME SEARCH
This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue or
loop point. To use the scroll function you must first be in Pause Mode (see section 4) or Cue Mode (see section
5). Once you are in Pause or Cue mode, press the SEARCH BUTTONS (31) to scroll through the track (Figure
6). When you use the SEARCH BUTTONS (31) the monitor (headphone level) function allows you to here what
you are scrolling through. Once you reach your desired starting point you can set a cue (starting) point by
pressing the PLAY/PAUSE BUTTON (33) as in Figure 4. Pressing the CUE BUTTON (34) as in Figure 5 will now
return you to the point you just set.
Figure 6
8. SETTING a CUE POINT:
A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (33) is pressed. A cue point
may be created anywhere on a disc or in a track.
1) You may press the IN BUTTON (35) on the fly (while the SD
Card is playing). This will set a CUE Point without music in-
terruption. Pressing the CUE BUTTON (34) will now return
you to the same point that you pressed the IN BUTTON
(35). Pressing the CUE BUTTON (34) will now return you to
this exact point.
Figure 7
Figure 8
2) You may also use the SEARCH BUTTONS (31) to set a cue
point. While a SD Card is in PAUSE or CUE mode, Use the
SEARCH BUTTONS (31) to scroll through a track to find your
desired starting point. Once you have found your desired
position press the PLAY BUTTON (33) to set your cue point.
Pressing the CUE BUTTON (34) will now return you to this
exact point.
©American Audio® - www.americanaudio.us - Q-SD Instruction Manual Page 20
Q-SD SD PLAYER BASIC OPERATIONS (CONT.)