Filter
Top Products
10. EXITING A LOOP - To exit a SEAMLESS
LOOP, press the OUT BUTTON (35). The IN
BUTTON (35) and OUT BUTTON (35) LEDs will
remain on, but will stop flashing. Music play-
back will resume normal play (Figure 12). The IN
BUTTON (35) and OUT BUTTON (35) LEDs will
remain on to remind you that a loop is stored.
Figure 12
11. REPLAY LOOP - The RELOOP (35) function allows
you to return to your stored loop at any time. The IN
BUTTON (35) and OUT BUTTON (35) LEDs will indicate
a loop is stored in memory, and may be played at any
time. To replay the loop, press the RELOOP BUTTON
(35) (Figure 13). The IN BUTTON (35) and OUT BUTTON
(35) LEDs will again begin to flash indicating SEAMLESS
LOOP mode has been activated and your stored loop will
immediately begin to play.
Stutter Effect: You can use your loop to create a stutter
effect. When a loop is playing press the IN BUTTON (35)
repeatedly to create this effect.
Figure 13
©American Audio® - www.americanaudio.us - Q-SD Instruction Manual Page 22
Q-SD SD PLAYER BASIC OPERATIONS (CONT.)
Figure 14
TIME BAR INDICATOR - Details the time defined in the TIME METER (46) as a visual bar icon. As with the
TIME METER (46) this bar is also dependent on the selected time function. This bar will begin to flash when a
track is ending regardless of which time function you are in. Use the flashing bar as a visual reminder that a
track is ending.
12. CHANGING THE TIME DISPLAY (46)\TIME BAR (40):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (32), will change the time display information (40
& 46) in the LCD (10) see figure 14. The following is a break down of the time settings and their definitions:
1) ELAPSED - This describes the time in the LCD (46) as the current TRACKS Elapsed running time.
2) REMAIN (48) - This describes the time in the LCD (46) as the current TRACKS remaining running time.