Filter
Top Products
AtlasSound.com – 18 –
Specifications are subject to change without notice.
Owner’s Manual
ECM-RACEWY
ECM-20, ECM-20M, & ECM-30
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
ECM-20/ECM-20M Specifications
Type Power Conditioner Suppressor Module
RoHS Compliant Yes
Safety Listings MET (UL 1449 Code)
Front Panel
Outlets Qty. 2, Switched
Manual Override Slide Switch
Connector 5 Position Phoenix Euro Block Style
Indicators Incoming AC, Active, AC Fault (ECM-20M Only)
AC Mains Interconnect Screw Block Terminal
Technical Data
Current Rating 15A
Operating Voltage 102VAC - 132VAC
Power Consumption 500 milliwatts
Power Requirements 120V 60Hz
Extreme Voltage Shutdown (EVS) Below 102V or Above 132V AC Line (When Used With ECS-6RM) (ECM-20M Only)
Fuse Protection 20A Slow Blow
DCV Remote Trigger 5 - 24VDC
Remote Trigger SPST Contact
Status Signals Output for Voltage and Current Data (ECM-20M Only)
High Voltage Surge Protection Trigger at 133VAC, 1ms Typically (When Used With ECS-6RM) (ECM-20M Only)
Spike and Surge Protection H-N, N-G, H-G
Low Voltage Protection Trigger at 101VAC, 1ms Typically (When Used With ECS-6RM) (ECM-20M Only)
Spike Protection Modes Circuitry on Incoming AC Mains
Min. Spike Clamping Voltage 460 VRMS @ 3,000 amps
Max. Spike Clamping Voltage 6KV
Max. Spike Clamping Resp. Time <1 nanosecond
Spike Clamping Voltage @ 100A 1,250Vp for 20µs
Maximum Surge Current 6,500A
Energy Rating @ 2ms 600 Joules
Noise Attenuation EMI/FRI 10dB @ 10kHz, 40dB @ 100 kHz, 100dB @ 10 MHz (ECM-20M Only)
Temperature Range 5° - 35°C
Humidity Range 5% to 95% R.H.
Mechanical
Chassis Finish Black
Mounting # 8
5
⁄16" Self Tapping Screws
Height 3" (7.6cm)
Length 8.5" (21.59cm)
Width 3.5" (8.89cm)
Weight 1.25 lbs (.68kg) (ECM-20)
1.75 lbs (.80kg) (ECM-20M)