Filter
Top Products
30
DVD System Setup Menu
DOWNMIX
SUBWOOFER
CENTER DELAY
REAR DELAY
FRONT
LT/RT
STEREO
VSS
5.1CH
SPEAKER SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
DIGITAL SETUP
LINE OUT
RF REMOD
SPEAKER SETUP
1. DOWNMIX
LT/RT The left channel and the right channel sound outputs
are mixed first and then the mixed sound output is redirected
to the left speaker and the right speaker simultaneously.
STEREO - Sound output is in Stereo Mode.
V SURR - Virtual Surround Sound.
5.1 CH - For 5.1 Channel surround sound.
2. SUBWOOFER
ON: If you have a subwoofer.
OFF: If you do not have a subwoofer.
3. CENTER DELAY
4. REAR DELAY
5. FRONT
Set this based on the size of your front speaker.
LARGE
SMALL
DIGITAL SETUP
1. OP MODE
LINE OUT - This setting compresses the output signal and
lowers the volume for use in a quieter
environment, such as at night time.
RF REMOD - This setting increases volume for regular usage.
2. DYNAMIC RANGE
When the OP CODE is set to LINE OUT, use this setting to
select the ratio of signal compression. Select FULL for the
lowest maximum signal and OFF for the highest maximum
signal.
3. DUAL MONO
STEREO - This setting plays the disc audio in the stereo mode.
MONO L - This setting plays only the left audio channel.
NOTE: For use only on Multiplex CDG discs.
MONO R - This setting plays only the right audio channel.
NOTE: For use only on Multiplex CDG discs.
MIX MONO - This setting plays the disc audio in the mixed
audio mode in which the left audio channel
and the right audio channel are mixed first
and then redirected to the left channel and
the right channel simultaneously.