Filter
Top Products
5
Basic Connections
Connecting to the AC outlet
To power the 9
What you will need
●AC power cord (included)
●Surge-protector (recommended) or a power outlet
Note: Before turning on the power make sure the red voltage selector [Fig. A] under the AC input is set to the
proper voltage. It should be set to 115V for North America and 230V for most European countries. Make sure
you know the proper voltage for your region before turning on the 9.
1.Connect the AC end of the power cord into the
AC input on the rear panel of the 9
2.Connect the other end to a surge-protector
or available power outlet
AKJ780
AKJ780
AKJ780
115
VOLTAGE SELECTOR
[Fig. A]
Since the AKJ7809 contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD
card player, the AKJ7809 can be used as a self-contained sound system. However, the AKJ7809 contains
various audio video outputs to allow the AKJ7809 to be connected to multiple TV sets, external sound
systems, and/or multiple sound effect devices. The following content demonstrates the procedures for
connecting the AKJ7809 to the AC outlet and other audio video devices.
T VT V
Connecting to a TV / video monitor with a RCA input
What you will need
●1 RCA-style video cable (included)
●TV / video monitor with a RCA video input
1.Connect one end of the RCA video cable to the yellow Video Out on the rear panel of the .
2.The has two RCA-type VIDEO OUTPUT jacks for connecting to TVs or monitor devices.
Both VIDEO OUTPUTS can be connected simultaneously.
3.Connect the other end of the RCA video cable to the Video Input on a TV / video monitor
AKJ7809
AKJ7809