Filter
Top Products
21
LEDs in the Volume section of the mixer surface will indicate the level in
real time. There are twelve LEDs in the Volume indicator, each capable of
displaying two levels, for a total of twenty-four visible lighted steps.
When a Channel is selected, the current volume is instantly indicated on the
LEDs. When no LEDs are lit, Channel volume is at its minimum setting.
A-16
Save
Recall
1 2
Group
Sol
o
Mut
e
Select
Mut
e
In R
ecall
Mode All
Volumes
Zero
3 4 5 6 7 8 9 10 11 12 13 14 15 16
Pan and Volume Controls
To make changes to a Channel:
• Select a Channel by pressing its numbered button—the
button’s upper LED will light.
• Rotate the V
OLUME knob to the right to increase the volume,
to the left to lower the volume
• While the Channel is still selected, you can also change the
Pan setting. Rotate the P
AN knob left or right to change the
position of the Channel in the stereo field.
Pan LEDs
The Pan indicator is made up of five LEDs. The center LED is green. The
LEDs on either side of center are red. As you turn the PAN knob, the LEDs
will light in various combinations to provide the maximum number of
position indicators with the fewest number of lamps. At either end of the
display only one LED will be lit to indicate that the Channel is panned full
left or right.
When using linked channels (stereo inputs), the LEDs light in different
patterns, using a pair of LEDs on either side of the display to indicate the
width of the stereo field. When the stereo image has been collapsed to
mono, only the center green LED will be lit. In this case the stereo input
will be heard as mono.
Mixing
Start creating a monitor mix by selecting the first Channel you want to
hear.