Filter
Top Products
Aviom A-16II Personal Mixer User Guide
30
• While still holding the GROUP button, press the MUTE button
once.
• The mix is trimmed by 6dB on all channels
• Perform additional trims as needed.
• Set the volumes on the current mix as needed.
• Save the mix as a Preset to preserve the changes.
Save
1 2
Select
Mute
3 4
5 6
7 8
9 10
11 12
13 14
15 16
Personal Mixer
A-16
Save
1 2
Select
Mute
3 4
5 6
7 8
9 10
11 12
13 14
15 16
Personal Mixer
A-16
Hold GROUP and then press MUTE to use the Global Trim function
Making Changes to a Mix
Once you have a basic monitor mix, you may want to make changes to fine
tune the settings for the individual Channels. This is as simple as selecting
the Channel and then adjusting the V
OLUME and PAN knobs as required.
When you select a Channel by pressing its corresponding numbered
Channel button, the current settings for channel volume and panning are
indicated instantly in the Volume and Pan LED readouts. When a Channel
is selected, you can always make real-time changes to its settings.
Note: Remember to save your new mix to a memory location before
turning the system off.
Save a Preset
Each Channel button on the A-16II front panel also serves as a memory
location. Saving a mix as a Preset allows instant recall of up to sixteen mix
scenes.
To save a mix as a Preset:
• Hold both the R
ECALL and GROUP buttons
• While holding down R
ECALL and GROUP, press one of the
Channel buttons (1 to 16) where you want the mix to be
saved.