Filter
Top Products
en
Audio connections
9
The following gure shows a setup of the 333XL-212 to-
gether with an external effects unit connected over the
FX LOOP. And the LINE OUT is connected to the line input
of a mixer in order to send the signal to a recording de-
vice. The LEVEL control of the LINE OUT lets you adjust
the output level of the BUGERA to the input sensitivity of
the mixer. In addition, the speaker signal of the BUGERA
is picked up by a microphone and is fed to the micro-
phone input of the mixer. This way you get a second
guitar signal which then can be amplied by a PA system
and/or can be recorded as well.
Live setup with a BUGERA combo
Audio connections
The inputs and outputs of the BUGERA amplier use
mono jack connectors.
¼" mono jack connector