Filter
Top Products
Recording and Play Back
E-15
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
To record to a specific track of a song
1.
Press the RECORDER button twice so its
lamp is flashing.
• At this time the L lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
Use the LR button to select the track to which
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 Selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page E-6)
• Effect (page E-9)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings, and
then press the METRONOME button. See “Using the
Metronome” on page E-10 for more information.
4.
Start playing something on the keyboard.
• Recording will start automatically.
5.
To stop recording, press the SONG X/
button again.
• This will cause the RECORDER button and LR
button lamps to change from flashing to lit.
• To play back the track you just recorded, press the
SONG X/
button.
6.
After you are finished recording or playing
back, press the RECORDER button so its
lamp goes out.
Recording Your Keyboard Play
AP400_e.book 15 ページ ２００８年４月１５日 火曜日 午後１２時３０分