Filter
Top Products
E-18
Configuring Settings with the Keyboard
In addition to selecting tones and Music Library tunes,
you also can use the TONE/SETTING button in
combination with the keyboard keys to configure
effect, keyboard touch, and other settings.
1.
Use the “Parameter List” on page E-20 to find
the setting you want to configure, and note its
details.
2.
Use “Keyboard Keys Used for Configuring
Settings” on page E-19 to find the location on
the keyboard for configuring the setting you
want.
3.
While holding down the TONE/SETTING
button, press the keyboard key for the setting
you want to configure.
• The digital piano will sound an operation tone after it
configures the setting.
Example: To lower the transpose setting by one
semitone by pressing the T keyboard key
once.
4.
Release the TONE/SETTING button to
complete the setting procedure.
NOTE
• You can configure the digital piano so no operation tone
sounds in step 3. For details, see “bp Operation Tone”
under “Parameter List” on pages E-20 - E-22.
■ Keyboard Setting Operation Types
There are three types of operations that you can
perform while configuring settings with the keyboard
keys: Type A, Type B, and Type C.
Type A: Direct input
Example: Pressing the STRINGS keyboard key to
select the STRINGS tone
Type B: Raising or lowering a setting using the + and
– or T and S keyboard keys
• Holding down a key raises or lowers the setting at
high speed.
• To return to the initial default setting, press both
keys at the same time.
Type C: Value input using the numeric keys (0 to 9)
Example: To enter “120”, press keys 1, 2, 0.
NOTE
• You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on page E-20.
TONE/SETTING
To configure settings with the
keyboard
Transpose T key
AP400_e.book 18 ページ ２００８年４月１５日 火曜日 午後１２時３０分