Filter
Top Products
E-24
Assembling the Stand
PREPARATION
• This stand does not include any of the tools required for
assembly. It is up to you to prepare a large Philips head
(+) screwdriver for assembly.
IMPORTANT!
• If anything is missing or damaged, contact your local
CASIO service provider.
• Note that use of any unauthorized parts or components
can cause damage to the stand and/or the digital piano.
z Before starting stand assembly, unfasten the band
1
that bundles the pedal cable in the back of crosspiece
D
, and extend the cable.
CAUTION
• Assembly of the stand should be performed by at least
two people working together.
• This stand should be assembled on a flat surface.
• Do not remove the tape securing the keyboard cover in
place until assembly is complete. Removing the tape can
cause the keyboard cover to open and close during
assembly, creating the risk of personal injury to your
hands and fingers.
• Take care that you do not pinch your fingers between
parts when assembling them.
1.
Attach side panels A and B to crosspiece D.
Secure the side panels using four E screws.
• When installing part 2, slide the brackets 3 into the
slots in either end crosspiece D. If the brackets 3 are
not inserted into the ends of the crosspiece
D
as far as
they will go, the E screws will not be able to enter
into the screw holes of the brackets 3, which can strip
the threads of the screws.
• Cover the screw heads with the caps J.
2.
Slide back panel
C
into the grooves
4
of the
side panels.
Unpacking
C
D
A
B
Part Qty
E
4
F
6
G
1
H
2
I
2
J
4
K
2
L
1
M
1
1
To assemble the stand
A
D
B
J
J
3
2
E
E
C
4
AP400_e.book 24 ページ ２００８年４月１５日 火曜日 午後１２時３０分