Filter
Top Products
E-26
Assembling the Stand
7.
First, use the two
H
butterfly bolts to secure
the back of the piano to the stand. Next, use
the two
K
screws to secure the front of the
piano.
IMPORTANT!
• The butterfly bolts
H
and screws
K
keep the piano from
slipping off the stand. Never use the piano without the
butterfly bolts
H
and screws
K
installed.
1.
Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
• Secure the pedal cord with the clip
G
.
2.
Check to make sure that the POWER button
is in the OFF position (raised). If power is on,
press the POWER button to turn it off.
3.
Plug the power cord that comes with the
digital piano into the AC power jack on the
bottom of the digital piano.
*
* AP-400V only
IMPORTANT!
• The shape of the power cord plug and household power
outlet receptacle differ according to country and
geographical area. The illustration shows just one
example of the shapes that are available.
• The power cord of the AP-400 is hard-wired to the digital
piano.
4.
Plug the power cord into a household power
outlet.
CAUTION
• The screws of the stand can work loose due to the effects
of temperature and humidity changes, vibration, etc.
Because of this, you need to periodically check the
screws for proper tightness. Retighten any loose screws
you find.
• To power the digital piano, use a power outlet that
allows easy access when plugging in or unplugging the
power cord.
To connect cables
H
K
G
Pedal plug
Power Cord
Household power outlet
AP400_e.book 26 ページ ２００８年４月１５日 火曜日 午後１２時３０分