Filter
Top Products
Using the Song Sequencer
E-89
3.
Press the C-10 (COPY) button.
• This displays the “Copy” screen.
• If you have already specified a range using the locator
screen (page E-74), that range will be displayed on the
range specification screen.
4.
Use the R-17 (u, i) button to move the
cursor, and then use the dial or R-14 (–, +)
buttons to change the value at the cursor
position.
5.
After everything is the way you want, press the
R-16 (ENTER) button.
6.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to copy or
the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button executes the copy
operation. The message “Complete” appears and the
display returns to the “Copy” screen after the copy is
complete.
• At this time, the “
Copy destination position” value on
the locator screen moves forward by the length
specified by “
Copy source range”.
If you want to continue by copying the same copy
source range to another location, repeat steps 5 and 6
again.
7.
To return to the event editor screen, press the
R-15 (EXIT) button.
1.
Display the event editor screen of the track that
includes the event you want to quantize.
• See “To select a track for editing” (page E-85).
2.
Use the R-17 (t, y) buttons to move the
cursor to the event you want to quantize.
3.
Press the C-11 (QUANTIZE) button.
• This displays the “Quantize” screen.
4.
Use the dial or R-14 (–, +) buttons to change the
setting in the thick brackets (%) to “Cursor”.
5.
Specify the note you want to use as the
quantize reference note.
* For a triplet, first select the note and then add the triplet. To
specify a triplet made up of quarter notes, for example,
press the R-3 (2) button and then the R-10 (,) button.
6.
After everything is the way you want, press the
R-16 (ENTER) button.
• This performs quantization and returns to the event
editor screen.
Copy source range (start point - end point)
Copy destination point
018:01:00 020:01:00 024:01:00 026:01:00
1 2
To quantize an individual note event
To specify this type of
note:
Press this button:
Quarter R-3 (2)
Eighth R-7 (6 )
Sixteenth R-8 (7)
Thirty-second R-9 (8)
Triplet
*
R-10 (,)
CTK6000_e.book 89 ページ ２０１０年７月１２日 月曜日 午後１２時５０分