Filter
Top Products
E-27
Applying Effects to Tones
Chorus Level (Range: 000 to 127)
Specifies the size of the chorus sound.
Chorus Rate (Range: 000 to 127)
Specifies the undulation speed of the chorus sound. A
higher value produces faster undulation.
Chorus Depth (Range: 000 to 127)
Specifies the undulation depth of the chorus sound. A
higher value produces deeper undulation.
• Whether or not an effect is applied to the parts that are
sounding also depends on Mixer Mode Reverb Send,
Chorus Send, and DSP on/off settings. See “Mixer Function”
on page E-36 for more information.
This keyboard has a built-in four-band equalizer and 10
different settings from which you can choose. You can adjust
the gain (volume) of all four equalizer bands within the range
of –12 to 0 to +12.
1. Press the EFFECT button so the pointer appears
next to EFFECT on the display screen.
2. Press the [ ] CURSOR button three times.
• This displays the equalizer editing screen.
• The equalizer type setting (step 4) screen will appear
automatically about fives seconds after you press the
button.
3. Press the [ ] CURSOR button.
4. Use the [
+
] and [–] buttons or the number buttons
to select the equalizer type you want.
• See the list on page A-13 for information about the
equalizer types that are available.
Example:
To select Jazz
• Pressing the EXIT or EFFECT button exits the
equalizer setting screen.
1. After selecting the equalizer type you want, use the
[ ] and [ ] CURSOR buttons to select the band
whose gain you want to adjust.
Example:
To adjust the HIGH band
2. Use the [
+
] and [–] buttons or the number buttons
to adjust the band gain.
Example:
To adjust the gain to 10
• Pressing the EXIT or EFFECT button exits the
equalizer setting screen.
• Changing to another equalizer type causes the band gain
settings to change to the initial settings for the newly selected
equalizer type automatically.
CHORUS Parameters
Using the Equalizer
To select the equalizer type
Jzza
To adjust the gain (volume) of a band
M i
g
hH
q
E
M i
g
hH
q
E
707A-E-029A