Filter
Top Products
24
MZ-2000 MIDI Implementation
0128 RevSend 8 00H - 7FH 28H
Reverb Send
Send level to system reverb
0129 VeloSenseDepth 8 00H - 7FH 40H
Velocity Sense Depth
Extent to which the velocity effect changes a note. The larger the value, the greater
the change.
0130 VeloSenseOffset 8 00H - 7FH 40H
Velocity Sense Offset
This indicates with how much force the note should be played
Specifies the note force offset for the velocity value.
The greater the value, the more forcibly a note is played for the same velocity value.
The center value is 40H.
0131 CC1Number 8 00H - 5FH 10H
Continuous Controller 1 Number
Specifies the Continuous Controller 1 number.
0132 CC2Number 8 00H - 5FH 11H
Continuous Controller 2 Number
Specifies the Continuous Controller 2 number.
0133 VibratoRate 8 00H - 7FH 40H
Vibrato Rate
Specifies the vibrato rate. (=NRPN:8) The greater the value, the faster the rate. The
center value is 40H.
00H : -64
40H : 0
7FH : +63
0134 VibratoDepth 8 00H - 7FH 40H
Vibrato Depth
Specifies the vibrato depth. (=NRPN:9) The greater the value, the deeper the depth.
The center value is 40H.
00H : -64
40H : 0
7FH : +63
0135 TvfCutoffFreq 8 00H - 7FH 40H
TVF Cutoff Frequency
Specifies the TVF cutoff frequency. (=NRPN:32) The greater the value, the brighter
the tone. The center value is 40H.
00H : -64
40H : 0
7FH : +63
0136 TvfResonance 8 00H - 7FH 40H
TVF Resonance
Specifies the TVF Resonance. (=NRPN:33) The greater the value, the more distinc-
tive the tone. The center value is 40H.
00H : -64
40H : 0
7FH : +63
0137 TvfTvaEnvAttack 8 00H - 7FH 40H
TVF-TVA Envelope Attack
Specifies the TVF and TVA envelope attack rate. (=NRPN:99) The greater the value,
the sharper faster the attack and the sharper the tone. The center value is 40H.
00H : -64
40H : 0
7FH : +63
0138 TvfTvaEnvDecay 8 00H - 7FH 40H
TVF/TVA Envelope Decay
Specifies the TVF and TVA envelope decay rate. (=NRPN:100) The greater the
value, the faster the decay of the tone while keyboard keys are depressed. The center
value is 40H.
00H :-64
40H : 0
7FH :+63
0139 TvfTvaEnvRelease 8 00H - 7FH 40H
TVF/TVA Envelop Release
Specifies the TVF and TVA envelope release rate. (=NRPN:102) The greater the
value, the faster the decay of the tone when keyboard keys are released. The center
value is 40H.
00H : -64
40H : 0
7FH : +63
0140 VibrateDelay 8 00H - 7FH 40H
Vibrato Delay
Specifies the vibrato delay length. (=NRPN:10) The greater the value, the longer the
delay length. The center value is 40H.
00H : -64
40H : 0
7FH : +63
0141 BankNumberMSB 8 00H - 7FH 00H
Bank Number
Tone bank number.
0142 ProgNum 8 00H - 7FH 00H
Program Number
Tone program number.
0143 ToneMapNum 8 00H - 01H 00H
Tone Map Number
Tone map number.
00h:[88](=CC 0:Selected, 1:PresetMap)
0144 ToneMap0Num 8 01H - 01H 01H
Tone Map 0 Number
01H: PresetMap
0145 MonoPoly 1 0H - 1H 1H
Mono/Poly Mode
Single notes only can be played in the Mono mode.
Chords and other multiple notes can be played in the Poly mode.
0H : Mono Mode
1H : Poly Mode
0146 AssignMode 2 0H - 1H 1H
Assign Mode
Specifies the operation when note on for the same note is received.
When Single is specified, the currently sounding note is turned off.
When Multi is specified, the currently sounding note continues to sound along with
the new note.
0H : Single
1H : Multi
0147 UseDrumPart 3 0H - 4H 0H
Use Drum Part
0H : OFF(Normal Part)
1H : Map1(Drum Part)
2H : Map2(Drum Part)
3H : Map3(Drum Part)
4H : Map4(Drum Part)
0148 EqLowFreq 2 0H - 3H 0H
EQ Low Frequency
Cutoff frequency of the low shelving equilizer.
0H : 200 (Hz)
1H : 400 (Hz)
2H : 800 (Hz)
3H : 1600 (Hz)
0149 EqLowGain 4 00H - 0CH 06H
EQ Low Gain
Gain of the low shelving equalizer
0H : -6(dB)
6H : 0(dB)
cH : +6(dB)