Filter
Top Products
33
MZ-2000 MIDI Implementation
4. Threshold
Threshold input level for the compressor/limiter effect. Though the compressor and limiter
use the same algorithm, the items in the effect Preset List named Limiter are optimized for the
limiter by setting the actual level for the threshold value at a high level.
5. Depth
Compressor/limiter compression factor. A large value results in a low signal level while the
compressor/limiter function is working, so correction is required depending on the Level
setting.
6. Level
Output level
Preset List
No Preset Name
00 Comp1 Light
01 Comp2 Light Mid
02 Comp3 Mid
03 Comp4 Deep Mid
04 Comp5 Deep
05 Comp6 Deep2
06 Comp7 Heavy
07 Comp8 LongSustain
08 Attack Gate1
09 Attack Gate2
10 Attack Gate3
11 Limiter1
12 Limiter2
13 Comp9 Thin
4.8.6.6 Stereo Compressor/Limiter
Specifications
TypeID FXID_STCOMP = 0101H
Available Part DSP, Master
I/O 2/2
Parameter List
ParaID Parameter Bit*Len Value-Range Value-Meaning
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 Fx Name 7*16 20H - 7EH -
0001 Bypass 1 0 - 1 0...Bypass
1...Effect
0002 Attack 7 0 - 127 0 - 127
0003 Release 7 0 - 127 0 - 127
0004 Threshold 7 0 - 127 0 - 127
0005 Depth 7 0 - 127 0 - 127
0006 Level 7 0 - 127 0 - 127
Operation
Though the Compressor/Limiter is a two-channel, left-right input effector, input signal level de-
tect is performed after the left and right signals are mixed. Operational principles and parameter
operations are identical to those for Compressor/Limiter. Parameter operations are identical for
the left and right channels.
Preset List
No Preset Name
00 Compressor1
01 Compressor2
02 Compressor3
03 Compressor4
04 Compressor5
05 Compressor6
06 Compressor7
07 Compressor8
08 AttackComp1
09 AttackComp2
10 AttackComp3
11 Limiter1
12 Limiter2
4.8.6.7 Slow Attack
Specifications
TypeID FXID_SLOW = 0104H
Available Part DSP
I/O 1/1
Parameter List
ParaID Parameter Bit*Len Value-Range Value-Meaning
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 Fx Name 7*16 20H - 7EH -
0001 Bypass 1 0 - 1 0...Bypass
1...Effect
0002 Threshold 7 0 - 127 0 - 127
0003 Attack 7 0 - 127 0 - 127
0004 Release 7 0 - 127 0 - 127
Operation
This effector change the input signal of the attach part to a slow attack. It is used for guitar tones
and solo synthesizer violin play.
Whenever the input signal drops below a preset level, the gate closes and the output signal is
muted. With the next input signal, the gate opens slowly, so the attack is eliminated. To delay the
attack, temporarily mute the input signal.
1. Bypass
Effector function enable/disable. Selecting bypass causes the input signal to be output as-is.
2. Threshold
Slow attach threshold input level. The output signal is muted when the input level is below
this setting. Setting a value that is too high causes the tone to be cut too quickly. Setting a
value that is too low causes incomplete muting and makes it impossible to obtain the slow
attack effect, and makes it difficult to play with little interval between notes. When setting a
value, you need to take such factors as the attenuation characteristics of the inputtone and
phrasing into consideration.ÅB
3. Attack
Signal rise attack time. The larger the value, the slower the rise.
4. Release
Time from the point the input signal drops below the Threshold level until the signal is muted.
Preset List
No Preset Name
00 Slow1
02 Slow2
03 Slow3
4.8.6.8 3-Band EQ
Specifications
TypeID FXID_3BEQ = 0200H
Available Part DSP
I/O 1/1
Parameter List
ParaID Parameter Bit*Len Value-Range Value-Meaning
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 Fx Name 7*16 20H - 7EH -
0001 Bypass 1 0 - 1 0...Bypass
1...Effect
0002 Lo Freq 7 8 - 40 50 - 2.0K(Hz) *Note1
0003 Lo Gain 7 52 - 64 - 76 -12dB - 0dB - +12dB
0004 Mid Freq 7 14 - 54 100 - 10K(Hz) *Note1
0005 Mid Gain 7 46 - 64 - 82 -18dB - 0dB - +18dB
0006 Mid Peak 7 10 - 120 1.0 - 12.0 (Q)
0007 Hi Freq 7 28 - 58 500 - 16.0K(Hz) *Note1
0008 Hi Gain 7 52 - 64 - 76 -12dB - 0dB - +12dB
0009 Level 7 0 - 127 0 - 127