Filter
Top Products
38
MZ-2000 MIDI Implementation
Operation
This effector simulates the effect of a rotary speaker, as an independently rotating woofer (Lo) and
tweeter (Hi). Parameters are available for presetting two rotation rates or to specify no initial
rotation, and acceleration rates can also be specified.
1. Bypass
Effector function enable/disable. Selecting bypass causes the input signal to be output as-is.
2. RateSelect
Speaker rotation rate.
3. Break
This parameter is used to stop speaker rotation. A setting of 0 (=Rot) turns on rotation, while
1 (=Stop) stops rotation.
4. HiSlowRate
Rate of Hi speaker rotation when Slow is selected for Rate Select.
5. HiFastRate
Rate of Hi speaker rotation when Fast is selected for Rate Select.
6. HiRiseAcel
Hi speaker rotation acceleration rate when Rate Select is switched from Slow to Fast, or when
Break is switched from Stop to Rotate.
7. HiFallAcel
Hi speaker rotation acceleration rate when Rate Select is switched from Fast to Slow, or when
Break is switched from Rotate to Stop.
8. LoSlowRate
Rate of Lo speaker rotation when Slow is selected for Rate Select.
9. LoFastRate
Rate of Lo speaker rotation when Fast is selected for Rate Select.
10. Lo Rise Accel
Lo speaker rotation acceleration rate when Rate Select is switched from Slow to Fast, or when
Break is switched from Stop to Rotate.
11. LoFallAccel
Lo speaker rotation acceleration rate when Rate Select is switched from Fast to Slow, or when
Break is switched from Rotate to Stop.
Preset List
No Preset Name
00 Standard Fast
01 Standard Slow
02 Deep Fast
03 Deep Slow
04 Soft Fast
05 Soft Slow
4.8.6.17 Phaser
Specifications
TypeID FXID_PHA = 0800H
Available Part DSP
I/O 1/1
Parameter List
ParaID Parameter Bit*Len Value-Range Value-Meaning
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 Fx Name 7*16 20H - 7EH -
0001 Bypass 1 0 - 1 0...Bypass
1...Effect
0002 Depth 7 0 - 127 0 - 127
0003 Rate 7 0 - 127 0 - 127
0004 Resonance 7 0 - 64 -127 -64 - 0 - +63
0005 Waveform 3 0 - 4 0...Sin
1...Tri
2...SawUp
3...SawDw
4...Squ
0006 Step 7 0 - 127 0 - 127
0007 Offset 7 0 - 127 0 - 127
Operation
This effector manipulates the phase of the input signal and directly mixes sound to produce an
interference effect. The offset of the phase is modulated by an LFO.
1. Bypass
Effector function enable/disable. Selecting bypass causes the input signal to be output as-is.
2. Depth
Effect depth.
3. Resonance
Resonance. The larger the value, the more of a characteristic tone is produced.
4. Rate
LFO rate
5. Waveform
LFO waveform
o Sin......Sine wave
o SawUp....Sawtooth wave (rising)
o SawDw....Sawtooth wave (falling)
o Squ......Square wave
6. Step
LFO continuity. A value of 0 specifies smooth change, while a larger value specifies coarser
change.
7. Offset
Allows manual setting of the reference phase position.
Preset List
No Preset Name
00 Phaser 1
01 Phaser 2
02 Phaser 3
03 Rotate 1
04 Rotate 2
05 Step1
06 Step2
07 Step3
08 ThinPhaser 1
09 ThinPhaser 2
10 ThinPhaser 3
11 Phaser 4
12 Phaser 5
13 Phaser 6
14 Phaser 7
4.8.6.18 Stereo Phaser
Specifications
TypeID FXID_STPHA = 0801H
Available Part DSP
I/O 2/2
Parameter List
ParaID Parameter Bit*Len Value-Range Value-Meaning
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 Fx Name 7*16 20H - 7EH -
0001 Bypass 1 0 - 1 0...Bypass
1...Effect
0002 Depth 7 0 - 127 0 - 127
0003 Rate 7 0 - 127 0 - 127
0004 Resonance 7 0 - 64 -127 -64 - 0 - +63
0005 Waveform 3 0 - 4 0...Sin
1...Tri
2...SawUp
3...SawDw
4...Squ
0006 Step 7 0 - 127 0 - 127
0007 Offset 7 0 - 127 0 - 127