Filter
Top Products
E-47
Synthesizer Mode
■
Vibrato Waveform (Range: See below.)
Specifies the vibrato waveform.
■
Vibrato Delay (Range: –64 to 00 to +63)
Specifies the amount of time before vibrato starts.
■
Vibrato Rate (Range: –64 to 00 to +63)
Rate (speed) of the vibrato effect
■
Vibrato Depth (Range: –64 to 00 to +63)
Depth of the vibrato effect
■
Octave Shift (Range: –2 to 0 to +2)
Up/down octave shift
■
Level (Range: 000 to 127)
This parameter controls the overall volume of the tone. The
greater the value, the greater the volume. Setting a level of
zero means that the tone does not sound at all.
ViSin .T e
yp
b
Value Meaning Waveform
Sin Sine Wave
Tri Triangle Wave
Sau Sawtooth Wave
Sqr Square Wave
Vi 00 Dela
y
b
Vi 02 .R etab
Vi 12 De ht
p
b
Oc -1 Sh tfit
Le096 e l v
■
Touch Sensitivity (Range: –64 to 00 to +63)
This parameter controls changes in the volume of the tone in
accordance with the pressure applied to the keyboard keys. A
greater positive value increases the volume of the output as
pressure increases, while a negative value decreases volume
with increased keyboard pressure. A setting of zero specifies
no change in output volume in accordance with keyboard
pressure.
■
Reverb Send (Range: 000 to 127)
This parameter adjusts reverb.
■
Chorus Send (Range: 000 to 127)
This parameter adjusts chorus.
■
DSP Line (Settings: On, Off)
This parameter controls whether or not the DSP effect is used.
Tc 32 Se esnh
Rv127 S dneb
Ch112 S dneo
DSOn L eniP