Filter
Top Products
E-71
Digital Piano Settings
{
MIDI Setting
Description
Specifies the send channel for main tone play.
Specifies whether accompaniment range MIDI Note On messages
received from an external device should be interpreted as auto
accompaniment chords.
Specifies whether this digital piano’s auto accompaniment or song
memory is sent as MIDI messages.
Specifies whether the digital piano should sound the parts played
on it.
Specifies the maximum change in a tone that can be applied using
the PITCH BEND wheel. The setting range is 00 (no change) to 12
(12 semitones).
Setting menu
Keyboard Channel
(Keybd Ch)
MIDI In Chord Judge
(Chord)
Accomp/Song MIDI Out
(Ac/SgOut)
Local Control Setting
(Local)
Pitch Bend Range
(Bend)
Range
01 to 16
On/Off
On/Off
On/Off
00 to 12
Default
01
Off
Off
On
12
Description
Adjusts display contrast.
Adjusts the amount of the pedal effect applied when the damper
pedal is pressed part way.
Sft: Assigns the soft pedal effect to the pedal.
Sos: Assigns the sostenuto pedal effect to the pedal.
When Mixer Hold is turned on, the parameters of accompaniment
parts (Part 6 through Part 10) cannot be modified by
accompaniment data.
On: Current DSP line setting is maintained, even when the tone is
changed.
Off: Changing the tone switches to the DSP line setting of the new
tone.
Setting menu
Contrast
(Contrast)
Half Damper Depth
(HalfDamp)
Soft/Sostenuto Pedal Jack
(Jack)
Mixer Hold
(MixHold)
DSP Hold
(DSP Hold)
Range
00 to 15
000 to 127
Sft/Sos
On/Off
On/Off
Default
07
072
Sft
Off
Off
{
Other Settings
{
Delete/Initialize Settings
Description
Deletes selected SMF data.
Deletes selected user rhythm data.
Deletes selected user tone data.
Initializes parameters assigned by the Mixer or by input from an
external sequencer.
Initializes all parameters, except for the display contrast setting.
Initializes the digital piano’s parameters and registration data, and
deletes all data stored in the digital piano’s user area.
Setting menu
SMF Delete
User Rhythm Delete
User Tone Delete
Mixer Reset
(InitMix?)
Parameter Reset
(InitPar?)
System Reset
(InitSys?)
Range
—
—
—
—
—
—
Default
—
—
—
—
—
—