Filter
Top Products
E-62
Assembling the Stand
IMPORTANT!
• After mounting the piano onto the stand, check to
make sure the sides of the piano and the side panels
of the stand are position relative to each other as
shown in the nearby illustration.
11.
Use the screws
J
to securely fix the brackets
at the top of side panels
A
and
B
to the
bottom of the piano.
12.
After checking to make sure the six screws
that secure side panels
A and B are fully
tightened, cover the heads of the screws with
screw caps
D.
1.
Making sure that the pedal unit cable plug is
oriented as shown in the illustration below,
plug it into the pedal connector on the bottom
of the digital piano.
• Press the plug fully into the connector as far as it will
go.
• Use the clips G to secure the pedal cable to two
locations on side panel B.
1.
Slide the music stand under the two bolts on
the top of the digital piano as shown in the
illustration and then tighten the bolts.
JJ
D
To connect the cable
To install the music stand
G
PX780_e.book 62 ページ ２０１２年１２月６日 木曜日 午後２時２６分