Filter
Top Products
E-7
Location
Avoid the following locations
for this product. Such locations
create the risk of fire and elec-
tric shock.
• Areas subject to high humid-
ity or large amounts of dust
• In food preparation areas or
other areas subject to oil
smoke
• Near air conditioning equip-
ment, on a heated carpet, in
areas exposed to direct sun-
light, inside of a vehicle
parked in the sun, or any oth-
er area that subjects the prod-
uct to high temperatures
Display Screen
• Never push on the display
screen’s LCD panel or subject
it to strong impact. Doing so
can cause the LCD panel’s
glass to crack, creating the risk
of personal injury.
• Should the LCD panel ever
crack or break, never touch
the liquid inside of the pan-
el. LCD panel liquid can
cause skin irritation.
• Should LCD panel liquid
ever get inside your mouth,
immediately wash out your
mouth with water and con-
tact your physician.
• Should LCD panel liquid
ever get into your eyes or
onto your skin, rinse with
clear water for at least 15
minutes, and then contact a
physician.
Sound Volume
Do not listen to music at very
loud volumes for long periods.
High volume settings can dam-
age your hearing.
D
Care of your keyboard
Avoid heat, humidity or direct sunlight.
Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in any
extremely hot place.
Do not use near a TV or radio.
This instrument can cause video or audio interference with TV and radio reception. If this happens,
move the instrument away from the TV or radio.
Do not use lacquer, thinner or similar chemicals for cleaning.
Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent.
Soak the cloth in the solution and squeeze until it is almost dry.
Avoid use in areas subjected to temperature extremes.
Extremely high or low temperature can cause figures on the LCD screen to become dim and difficult to
read. This condition should correct itself when the keyboard is brought back to normal temperature.
❚
NOTE
❚
You may notice lines in the finish of the case of this keyboard. These lines are a result of the molding
process used to shape the plastic of the case. They are not cracks or breaks in the plastic, and are no
cause for concern.
SA65/67_E.p65 03.10.31, 5:31 PMPage 7 Adobe PageMaker 6.5J/PPC