Filter
Top Products
E-17
Connections
• WK-3700
Phones and Line Out Terminals
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Front]
Connecting Phones
1
Connecting phones cuts off output from the keyboard’s built-
in speakers, so you can play even late at night without
disturbing anyone.
[Rear Panel]
Connecting to Audio Equipment
2
Use commercially available cords to connect to the two jacks
as shown in Figure
2
. It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Normally in this configuration, you must set the audio
equipment’s input selector to the setting that specifies the
terminal (such as AUX IN) that the keyboard is connected to.
Use the keyboard’s MAIN VOLUME knob to adjust the
volume level.
OUT IN
SUSTAIN/
ASSIGNABLE JACK
MIDI
LINE OUT
R L/MONO
DC 12V
Standard plugs
Guitar amplifier,
keyboard amplifier, etc.
Audio amplifier AUX IN, etc.
PIN plug
Standard jacks
INPUT 1
INPUT 2
LEFT
(White)
RIGHT
(Red)
Connecting to a Musical Instrument Amplifier
3
Use commercially available cords to connect to the two jacks
as shown in Figure
3
. It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Use the keyboard’s MAIN VOLUME knob to adjust the
volume level.
• If your amplifier has only one input jack, connect a cord to
the L/MONO jack only.
NOTE
• You can also connect the keyboard’s MIDI terminal to a
computer or sequencer. See “MIDI” on page E-79 for
details.
738A-E-019A
1
PHONES Terminal
Stereo standard plug
• WK-3200
Phones/Output Terminal
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Front]
Connecting Phones
1
Connecting phones cuts off output from the keyboard’s built-
in speakers, so you can play even late at night without
disturbing anyone.
Audio Equipment
2
Connect the keyboard to a audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. Note that
the standard plug you connect to the keyboard must be a
stereo plug, otherwise you will be able to output only one of
stereo channels. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
LEFT
RIGHT
AUX IN or similar terminal
of audio amplifier
White
Red
PIN plug
Stereo standard
plug
Audio connection
PHONES/OUTPUT Terminal
Keyboard amp,
guitar amp, etc.
1
2
3
WK3200_e_10-21.p65 05.3.15, 6:16 PM17