Recording and Playing Audio
E-125
1.
Perform the procedure under “To get ready for
audio recording” (page E-123).
• This enters the rhythm mode.
2.
Perform steps 1 through 4 under “To perform
using a music preset” (page E-54).
• This enters music preset record standby.
3.
Perform steps 3 through 6 under “To record
play in the rhythm mode” (page E-123) to start
recording.
4.
Perform steps 5 through 7 under “To perform
using a music preset” (page E-54).
5.
To quit recording, press the C-2 (AUDIO
RECORD) button.
1.
Perform the procedure under “To get ready for
audio recording” (page E-123).
• This enters the rhythm mode.
2.
Perform steps 1 through 3 under “To play a
recorded song” (page E-79) to prepare for song
playback.
• This enters the song sequencer mode.
3.
Perform steps 3 through 6 under “To record
play in the rhythm mode” (page E-123) to start
recording.
4.
Press the L-16 (START/STOP) button to start
song playback.
5.
To quit recording, press the C-2 (AUDIO
RECORD) button.
You can use the operations in this section to navigate
between modes and screens while recording.
■Rhythm Mode Operations (: indicator
displayed)
Operations in the Rhythm Mode
• You can use the R-17 (t, y) buttons to switch between
the audio record screen and the rhythm mode screen.
• While the audio record screen is displayed, press the C-9
(CARD) button to display the rhythm mode screen.
Displaying the Song Sequencer Mode Screen from the
Rhythm Mode Screen
• While the audio record screen or rhythm mode screen is
displayed, press the C-4 (SONG SEQUENCER) button to
display the song sequencer mode screen. This will cause
the : indicator to disappear from the display and the
< indicator to appear.
■Song Sequencer Mode Operations (<
indicator displayed)
Operations in the Song Sequencer Mode
• You can use the R-17 (t, y) buttons to switch between
the audio record screen and the song sequencer mode
screen.
• While the song sequencer mode screen is displayed, press
the C-4 (SONG SEQUENCER) button to display the audio
record screen.
Displaying the Rhythm Mode Screen from the Song
Sequencer Mode Screen
• While the audio record screen or song sequencer mode
screen is displayed, press the C-9 (CARD) button to display
the rhythm mode screen. This will cause the <
indicator to disappear from the display and the :
indicator to appear.
• While the audio record screen or rhythm mode screen is
displayed, press the C-4 (SONG SEQUENCER) button to
display the rhythm mode screen. This will cause the
< indicator to disappear from the display and the
: indicator to appear. The screen content does not
change at this time.
To record play using a music preset
To record play in the song sequencer mode
Navigating between Modes and Screens
during Recording Standby and Recording