Filter
Top Products
3
Part names and functions
Top panel
For buttons not explained here, see the page indicated in parentheses ( ).
q
w
e
t
r
y
u
o
Q0
Q1
Q2
Q3
Q5Q6Q5Q4Q7
E8 E9E7
Q4
i
E1
E0
W9
W8
W6
W7
W5
W4
W2
W3
W1
W0
Q9
Q8
E2 E3E4 E5 E6 E2 E3E4
q USB enable display (USB)
• Lights a pale blue color when connected to a
computer.
• Lights a deep blue color when MIDI command
is sent.
w Booth/Send, Effect/Send level adjustment
knob (BOOTH/SEND LEVEL) ·······················(5)
e Display
Displays the BPM value and device settings.
r Beat display ················································(11)
t Beat switch button (BEAT) ············(11, 14, 15)
y Tap button
(TAP/LOCK/AUTO/INPUT BPM) ···(11, 14, 15)
TAP:
• When this button is tapped repeatedly, the
BPM is measured using the intervals between
taps.
LOCK:
• When this button is pressed once in the
auto BPM mode, the BPM value measured
automatically is locked.
AUTO BPM:
• When this button is held down for one second,
the mode switches to auto BPM mode, and
the measured BPM value is displayed.
INPUT BPM:
• When this button is held down for more than
2 seconds, the mode switches to BPM input
mode, and the BPM value can be entered
directly using the t beat selection button.
This mode is cleared by pressing the button
again.
u Send/Return mode selection button
(SEND/RETURN) ········································ (10)
i Send/Return mode display
(SEND/RETURN) ········································ (10)
o Effect selection knob
(EFX SELECT) ··············································(11)
Q0 Effect filter adjustment knob
(EFX FREQ) ··················································(11)
Q1 Effect CUE button (CUE) ····························(11)
Q2 Dry/Wet adjustment knob
(DRY/WET) ··················································(11)
Q3 Effect ON/OFF button
(ON/OFF) ·····················································(11)
Q4 Channel effect send button
(EFX SEND) ·················································(11)
• Flashes for target AUTO BPM
Q5 Channel fader
(CH FADER) ·············································(9, 12)
Q6 Cross fader
(CROSS FADER) ······································(9, 12)
Q7 Headphone level adjustment knob
(PHONES LEVEL) ··········································(9)
• When using headphones, be cautious to avoid
prolonged loud volume in order to protect your
ears.
Q8 Split cue button
(SPLIT CUE) ···················································(9)
Q9 Headphone pan adjustment knob (PAN) ···(9)
W0 Channel monitor selection button
(MONITOR CH1/CH2) ···································(9)
W1 Channel fader contour adjustment knob
(CH FADER CONTOUR) ······························(13)
W2 Cross fader contour adjustment knob
(CROSS FADER CONTOUR) ·······················(13)
W3 MIC/AUX1 send level adjustment knob
(LEVEL) ··························································(9)
Adjusts the send level to the master output for
the mic signal or AUX1 input signal.
W4 MIC/AUX1 effect insertion button
(EFX INS) ·······················································(9)
Various effects can be applied to mic input
signals and AUX1 input signals. Flashes for
target AUTO BPM
W5 MIC/AUX1 EQ adjustment knob
(HI/LOW) ·······················································(9)
Adjusts the frequency characteristics for the mic
input signal and AUX1 input signal.