Filter
Top Products
12
Before use
Part names and
functions
Connections
Basic
operations
Fader
Start function
USB settings
Troubleshooting
IndeX
specifications
System diagram
Effector
function
The fader start function controls playback/pause of the CD/Media
player using the fader control on the unit by sending a fader command
to the player.
Connect the FADER terminal on this unit to a FADER compatible DJ
player using a 3.5mm stereo mini plug cable in advance.
Channel fader start
1
Switch the CH FADER START to ”ON”.
2
Adjust SOURCE SEL to match the CD input (”CD1”
or ”CD2”).
3
Move the channel fader knob for the CD input
channel to the lowest position.
The player switches to CUE up status.
4
Move the channel fader knob upwards.
The CD player starts playback.
If the channel fader knob is then moved all the way down, the
player stops.
Fader start function
Cross fader start
This section explains how to start playback for a CD/Media player
connected to CH1.
1
Switch the CROSS FADER START to ”ON”.
2
Turn the CH1 SOURCE SEL to ”CD1”.
3
Slide the cross fader all the way to the ”2” (CH2)
position.
4
The player switches to CUE up status.
5
Set CROSS to a position other than ”THRU”.
6
Move the cross fader in the opposite direction.
The player starts playback.
NOTE
If you set CROSS to the “THRU” position, the cross fader start
function will be disabled.
CROSS
SOURCE SEL
CROSS FADER START
CH FADER START
Cross fader
Channel fader