Filter
Top Products
11
MAINTENANCE
WARNING
Disconnect power before attempting any
maintenance or cleaning to reduce the risk of fire,
electric shock or damage to persons.
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool before
touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a
dark section of the flame or when the clarity and
detail of the log exterior disappears. There are two
bulbs under the log set which generate the flames
and embers.
TOOL REQUIREMENTS
-None
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time
if they are close to the end of their rated life. Group
replacement will reduce the number of times you
need to open the unit to replace light bulbs.
LOWER LIGHT BULB REQUIREMENTS
Quantity of 3 – 60W Chandelier or candelabra bulbs
with E-12 (small) socket base, 120 Volt.
DO NOT EXCEED 60-WATTS PER
BULB.