Filter
Top Products
12
BULB REPLACEMENT INSTRUCTIONS:
1. Unplug the unit from the outlet.
2. Remove glass assembly as shown in figure 5.
3. Reach in and turn the burnt-out bulb(s) (or all
bulbs) counter-clockwise to remove.
4. Replace with new bulbs.
5. Fit glass assembly back in place.
6. Plug in the Sahara fireplace.
GLASS CLEANING
The front glass is cleaned in the factory during the
assembly operation. During shipment, installation,
handling, etc., the front glass may collect dust
particles, these can be removed by dusting lightly
with a clean dry cloth.
To remove fingerprints or other marks, the glass can
be cleaned with a damp cloth. The glass should be
completely dried with a lint free cloth to prevent
water spots. To prevent scratching, do not use
abrasive cleaners or spray liquids on the glass
surface.
SAHARA FIREPLACE SURFACE CLEANING
To remove fingerprints or other marks, the exterior
finish can be cleaned with a damp cloth with a mild
detergent. The surface should be completely dried
with a lint free cloth to prevent water spots.
To prevent scratching, do not use abrasive
cleaners or spray liquids on any surface.