Filter
Top Products
5
NOTE: It is recommended that the bottom of the
unit not be mounted higher than 40" from the
ground (mounting bracket no higher than 62").
WARNING
Ensure the front of the installed unit will be at least 3
feet (0.9m) from combustible materials, such as
furniture, pillows, bedding, papers, clothes, and
curtains.
2. The wall-mounting bracket must be mounted
to at least two wall studs. Studs should be
accessed through two wall-bracket holes in
one of the following combinations: A&F,
B&D, or C&E (FIGURE 2).
NOTE: Wall anchors must be installed in the
appropriate wall locations to fasten the wall bracket
through the remaining holes (Figure 4). For
example, if you plan to secure the bracket to studs
through holes A&F, install anchors centered on
holes B, C, D, and E.
3. Hold the wall-mounting bracket on the wall and
mark the location of ONE of the mounting holes.
4. Place the bubble level onto the top of the wall-
mounting bracket.
Figure 1
Figure 2