Filter
Top Products
SECTION TWO - About the Bass30
Performance Mode
The Performance Mode of the Bass30 enables you to use the numbered footswitches or Data Wheel to change
from one Preset to another, the Bank Footswitches to change Banks, and the Expression Pedal to vary the amount
of the assigned Parameter. From the Performance mode you may also bypass the Bass30 by pressing the active
Preset’s Footswitch, or access the built-in chromatic tuner by pressing and holding the active Preset’s Footswitch.
Selecting a Preset
Accessing the Presets may be done by using the Data Wheel or Footswitches. The Bass30 has 30 Factory and 30
User Preset locations. The Presets in the Bass30 are arranged in 10 Banks with 3 Presets in each bank. The User
Presets are indicated by a decimal point in the bottom right corner of the Display. The Factory Presets do not have
the decimal point.
Data Wheel
While in Performance mode, the Data Wheel is used to select Presets. Simply rotate the Data Wheel until the
desired preset number is shown in the Display. The Data Wheel will scroll through all of the Presets in the User
Banks, and then scroll through all of the Presets in the Factory Banks. If you continue to rotate the Data Wheel,
the Bass30 will “wrap around” and access the User Presets again. In edit mode, rotating the Data Wheel will
change the status or value of the selected effect or parameter. In Tuner mode, rotating the Data Wheel will change
the tuning reference. In Bi-Amp mode, rotating the Data Wheel will change the Bi-Amp crossover frequency.
8