Filter
Top Products
8. Bi-Amp - This button provides access to the Crossover frequency for Bi-amp Applications. The Crossover
frequency can then be selected by rotating the Data Wheel. See page 25 for more information on Bi-Amping
9. Store - This button is used to save changes to Presets. The LED above this button will light when a change
has been made to effects or parameters in a preset indicating that you need to perform the Store function in order
to retain your changes. See page 17 for more information on storing procedures.
10. Display - While in edit mode, the Display will show the status of the selected Effect, or the value of the
selected Parameter. When an effect is bypassed, the display will indicate bypass by showing two dashes -- .
Rotating the Data Wheel will re-engage the effect, or change the value of the selected Parameter.
Expression Pedal Assignments
The Bass30 allows you to assign the Expression Pedal to control various Parameters in real time. Only one
Parameter at a time can be assigned to the Expression Pedal. The procedure for assigning a Parameter to the
Expression Pedal is as follows:
1.- Press the Expression button once. The Expression LED, and the LED of the Parameter currently assigned to the
Expression Pedal begins to flash.
2. - Rotate the Data Wheel to select the Effect or Parameter you wish to assign. The selection will be indicated by a
flashing LED in the effect group, or parameter section. The Display will show a number between 1 and 13
representing the 12 possibilities. Your choices include:
1 - Volume 6 - Bass Synth Level 11 - Delay Regeneration
2 - Wah 7 - Modulation Speed 12 - Delay Level
3 - Model Gain 8 - Modulation Depth 13 - Reverb Level
4 - Bass Synth Speed 9 - Bend Amount -- Not Assigned
5 - Bass Synth Amount 10 - Modulation Level
15