Filter
Top Products
Rotate the Data Wheel until the Display shows 0. Press the Tone/Gate button again and the LED next to Low Mid
flashes. Rotate the Data Wheel until the Display shows 0.Press the Tone/Gate button again and the Bass LED will
flash. Rotate the Data Wheel until the Display shows 6. Press the Tone/Gate button one more time and the Gate
LED flashes. Rotate the Data Wheel until the Display shows 3.
Step 6 Select the Chorus Effect - Press the Effect button until the LED next to Chorus is flashing. If the Chorus
is bypassed (indicated by two dashes -- in the Display), rotate the Data Wheel until the Display shows on.
You will notice that the Parameter LEDs next to the words “Speed,” “Depth,” and “Level” are now lit. This
indicates that these three Parameters are associated with the Chorus, and available for adjustment. Press the
Parameter Edit button once and the Speed LED will begin to flash indicating that you are about to edit the Chorus
Speed. The Display will show the current value for the Chorus Speed. Since our sample Preset calls for a slow
medium Chorus, use the Data Wheel to set the Speed value to 5. Press the Parameter button again and the Depth
LED flashes. Rotate the Data Wheel until the Display shows 10. Press the Parameter button again and the Level
LED flashes. Rotate the Data Wheel until the Display shows 50.
28