Edirol V1 video mixer Musical Instrument User Manual


 
18
Basic operation
You can make use of a variety of transition effects when using the video fader or
input selector to switch images.
You can smoothly mix between two images.
1
Press the MIX button.
The MIX button will light.
2
Use the video fader or input selector to switch between images.
You can “wipe” between images in a manner similar to the way a windshield wiper
on a car wipes off rainwater.
1
Press the WIPE / P in P button.
fig.07-05-1.eps
2
Use the transition pattern knob to select the type of wipe.
Knob settings on the left side select a wipe pattern. Knob settings on the right side
select P in P compositing.
fig.07-05-2.eps
* The wipe will occur in a single fixed direction for each type of wipe.
3
Use the video fader or input selector to switch between images.
Changing the transition effect
Mixing images
Wiping
Mix
Horizontal wipe (soft)
Wipe Pattern
Horizontal wipe
Vertical wipe
Vertical wipe (soft)
Wipe
If you use the input selector,
you’ll need to adjust the
Transition Time knob.
Soft wipe
This is a wipe effect in which
the transition boundary is
b
lurred. The images in the
vicinity of the border will be
mixed.