Edirol V1 video mixer Musical Instrument User Manual


 
26
MIDI implementation
2-2-1. System Common Preference
2-2-2. Clip Control Preference
2-2-3. Color Control Preference
3. Additional information
MIDI transmission/reception settings when the V-1 is shipped from the factory.
Note Mode
This specifies whether note-on messages will switch the inputs.
The factory setting is OFF.
This can be set via MIDI to 0--3, corresponding to OFF, 49Keys Mode, Assign Mode, and
Note Assign.
MIDI Rx Channel
Specifies the MIDI receive channel of the V-1.
The factory setting is 1.
This can be set via MIDI to 0--16, corresponding to 1--16 and OFF.
MIDI Tx Channel
Specifies the MIDI transmit channel of the V-1.
The factory setting is 1.
Transition Time
Specifies the transition time.
When shipped, this is assigned to CC#07 (Volume).
The range is 0--127, corresponding to 0.0 seconds through 4.0 seconds.
Superimpose
Turns the Superimpose effect on/off and specifies its value.
When shipped, this is assigned to CC#04 (Foot type).
The range is 0, 1--127, corresponding to OFF, ON: 0--Max.
Transition Pattern
Selects the type of transition.
When shipped, this is assigned to CC#01 (Modulation).
The range is 0--1, corresponding to MIX through WIPE/P in P.
Output
Controls the output.
When shipped, this is assigned to CC#02 (Breath type).
The MIDI value range is 0--64--127, corresponding to OFF (black)--ON--OFF (white).
Video Fader
Controls the video fader.
When shipped, this is assigned to CC#11 (Expression).
The MIDI value range is 0--127, corresponding to A--B.
Default V-LINK settings
The default V-LINK state (i.e., when only the V-LINK ON message has been received) is as
follows.
* When V-LINK is OFF, any V-LINK messages received will be ignored.
* Settings that were modified while V-LINK was on (i.e., settings that can be modified via
MIDI) are not saved.
* When changing from V-LINK ON to OFF, the V-1 will revert to the settings it had before
V-LINK was turned on.
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 00H 00H V-LINK Enabled 00H - 01H OFF, ON
10H 00H 01H V-LINK MIDI Rx Channel
(Clip)
00H - 0FH 1 - 16 Ch.
10H 00H 02H V-LINK MIDI Rx Channel
(Color)
--- ---
10H 00H 03H
V-LINK Note Message Enabled
00H - 03H Note Mode: OFF,
49Keys Mode,
Assign Mode,
Note Assign
10H 00H 04H
V-LINK Fast Control Enabled
--- ---
10H 00H 05H V-LINK MMC Control
Mode
--- ---
10H 00H 06H V-LINK MTC Control Mode --- ---
10H 00H 07H V-LINK Auto Mix Mode --- ---
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 10H 00H V-LINK Rx Setting
(Playback Speed)
--- ---
#10H 10H 02H V-LINK Rx Setting
(Dissolve Time)
01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH
Transition Time:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 04H V-LINK Rx Setting
(Audio Level)
--- ---
#10H 10H 06H V-LINK Rx Setting
(T-Bar Control)
01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH
Video Fader:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 08H V-LINK Rx Setting
(Dual Stream)
--- ---
#10H 10H 0AH V-LINK
Reserved
--- ---
#10H 10H 0CH V-LINK
Reserved
--- ---
#10H 10H 0EH V-LINK
Reserved
--- ---
#10H 10H 10H V-LINK Rx Setting
(Transition Select)
01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH
MIX, WIPE / P in P:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 12H V-LINK Rx Setting
(Transformer A)
---
#10H 10H 14H V-LINK Rx Setting
(Transformer B)
---
#10H 10H 16H V-LINK Rx Setting
(BPM Sync)
---
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 20H 00H V-LINK Rx Setting
(Color Cb)
--- ---
#10H 20H 02H V-LINK Rx Setting
(Color Cr)
--- ---
#10H 20H 04H V-LINK Rx Setting
(Brightness)
--- ---
#10H 20H 06H V-LINK Rx Setting
(VFX A 1)
01H-05H,07H-1FH,
40H-5FH, D0H, E0H,
FFH
Superimpose:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 20H 08H V-LINK Rx Setting
(VFX A 2)
--- ---
#10H 20H 0AH V-LINK Rx Setting
(VFX A 3)
--- ---
#10H 20H 0CH V-LINK Rx Setting
(VFX A 4)
--- ---
#10H 20H 0EH V-LINK Reserved --- ---
#10H 20H 10H V-LINK Reserved --- ---
#10H 20H 12H V-LINK Reserved --- ---
#10H 20H 14H V-LINK Reserved --- ---
#10H 20H 16H V-LINK Rx Setting
(VFX B 1)
--- ---
#10H 20H 18H V-LINK Rx Setting
(VFX B 2)
--- ---
#10H 20H 1AH V-LINK Rx Setting
(VFX B 3)
--- ---
#10H 20H 1CH V-LINK Rx Setting
(VFX B 4)
--- ---
#10H 20H 1EH V-LINK Reserved --- ---
#10H 20H 20H V-LINK Rx Setting
(Output Fader)
01H-05H,07H-1FH,
40H-5FH, D0H, E0H,
FFH
Output:
Control Change,
Channel Press,
Pitch Bend, OFF
Parameter Assignment Value
Note Mode - OFF
Rx Channel - 1
Tx Channel - 1
Input Select - Ach:1
Bch:2
Pattern Select - 1
Transition Time CC#5 0.0sec
Superimpose OFF OFF
Transition Pattern OFF 1
Output OFF ON
Video Fader CC#11 A 100%